Login | Register 
Clip this Page |Discuss this Page |Email this Page |Print this Page
  Innovations for the materials of the future

Oerlikon is synonymous with innovative industrial solutions and advanced technologies for textile manufacturing, drives, vacuum and solar technology, thin-film coating and advanced nanotechnology.

Pfäffikon SZ, Switzerland: If the Eiffel tower had been built 124-years later, Oerlikon would have assuredly played a significant part in its construction. Because what was riveted, screwed or welded together using iron and steel components back then would today be primarily made of composites – and the Oerlikon Textile, Vacuum and Coating segments today supply a wide range of technology and components for their production. These are the focus of the Oerlikon show appearance at the JEC recently in Paris.

Carbon fibres are used in applications where low weight and extreme stability are prerequisites. Carbon fibre-reinforced plastics are used, to name a few areas, in the aeronautics and aerospace industry, wind power plants, automotive industry, safety technology and in high-quality sports equipment such as racing bicycles, tennis racquets, skis and boats.

Oerlikon Barmag has developed a winder specially for the production of carbon fibres called WinTrax. The two-yarn winding head combines the economic production of top quality carbon fibres with simultaneously perfect package building and identical running lengths. In addition, the new WinTrax-A 2cop produces packages with a diameter of up to 310 mm. The resulting higher package weights reduce tooling times and therefore significantly reduce outlay during composite production. Due to the identical running lengths of all packages, waste is reduced to nearly zero percent.

The production of composites frequently requires filaments or tapes with particular properties, such as high tensile strength, low elongation or a high modulus of elasticity. The extrusion systems for producing these high-quality tapes, monofilaments, and multi-filaments are another information highlight of Oerlikon Barmag at the JEC.

The exhibits also include the independent metering unit GM Control, newly developed by Oerlikon Barmag. Oerlikon Barmag is responding here to the demands of numerous users for an easy to use plug-and-play version of its proven GM metering pump series. The unit can be controlled directly and can also be retrofitted to existing process control systems.

Whether for casting PUR parts, lamination of composite parts, metering additives in an ongoing extrusion process, application of cold adhesives or for flexible use in production systems with changing requirements - the compact and mobile GM Control unit can support all these tasks with the usual high metering accuracy and with even more ease of use.

The core of the GM Control metering unit - the GM pump - is available for numerous conveying capacities. This means that an appropriate metering unit can be provided for various throughput volumes.

Delicate handling of glass filaments thanks to modern technology

Two further brands in the Oerlikon Textile segment are also presenting their latest products in the glass sector: Oerlikon Saurer and Oerlikon Textile Components. At the Oerlikon joint booth, visitors can learn all about the Volkmann GT (GlassTwister), the trend-setting ring twister used for the production of glass filament yarns. Oerlikon Saurer offers its customers the complete spectrum of innovative solutions and services in the glass sector with its product line Volkmann.

The GlassTwister is modular in design and the main components are the creel baskets and ring twisting spindles. Both components are equipped with single motor drives and pneumatic brakes. They are supplemented by the central ring rail drive with servomotor. The complete synchronisation of all components and the programmable ring rail guide enables an optimal package build and thereby a perfect processing of the twist packages in the subsequent processing steps. The ergonomic design enables the operating personnel to carefully feed the machine at a comfortable working height, which ensures a careful handling of the spinning cakes and thereby the quality of the feed material.

The Volkmann GlassTwister is able to twist plied yarn structures, eg, 3-ply yarns and hybrid yarns, when being equipped with a package creel and godet supply units in place of the creel baskets. Production of single or multi-ply yarns from raw materials in the count range between 10 and 5000 tex. Flexible application areas: For eg PA, PES, CV, Aramid, PVA, Dyneema, PE/PP as multiple, or monofilaments.

Oerlikon Textile Components can look back at over 40-years of experience in the production of components specially developed for the glass fibre industry. At the JEC, this business unit will be presenting innovative aprons from the Accotex® series which are used in glass fibre processing. The glass fibre apron Accotex® 964 FG3 was specially developed for super-fine filaments such as BC (4 µm), C (4.5 µm) or D (5 µm).

Vacuum pumps are essential in the production of composites

In addition to the innovative Oerlikon Textile exhibits, the Oerlikon Group is also presenting new coating solutions from Oerlikon Balzers at their exhibition booth, as well as aspects of the vacuum technology supplied by Oerlikon Leybold.

Oerlikon Leybold Vacuum provides pumps & systems for various applications. The Sogevac, Trivac & SP pump series have proven themselves over the years in degassing, lamination and resin transfer moulding applications. Based on their experience in these difficult processes, Oerlikon Leybold Vacuum can offer optimised vacuum pumps, ranging from 10 to 300 m3/h, and complete systems. The wide motor range enables worldwide deployment of these pumps. Oil-lubricated pumps (Sogevac or Trivac) or dry-running pumps (SP) can be used according to customer requirements. Thanks to specially selected oils, the Trivac & Sogevac series enable long working intervals without maintenance and with adapted optimal performance features. Major manufacturers of wind generator rotor blades, shipyards, aircraft builders and component manufacturers in America, Europe, and Asia trust in technology made by Oerlikon Leybold Vacuum.

More than 90 Oerlikon Balzers Coating Centre worldwide

Oerlikon Balzers is the world’s leading supplier of surface technologies, which significantly improve the performance and durability of precision components as well as tools for the metal and plastics processing industries. These coatings, marketed under the BALINIT® brand name, are extremely thin and exceptionally hard. They significantly reduce friction and wear. BALINIT® DIAMOND PLUS is the solution for aluminium alloys and composite materials. An especially smooth, nanocrystalline structure facilitates chip flow and prevents the formation of built-up edges. Cutting forces are significantly reduced. Thanks to the excellent surface quality of the work pieces, no reworking is necessary.

Oerlikon (SIX: OERL) is one of the world’s leading high-tech industrial groups, specialising in machinery and plant manufacture. The company is synonymous with innovative industrial solutions and advanced technologies for textile manufacturing, drives, vacuum and solar technology, thin-film coating and advanced nanotechnology. Originally established in Switzerland and with a tradition stretching back more than 100-years, Oerlikon is now a global player employing more than 17,000 people at over 150 locations in 38 countries and generated turnover of CHF 4.2 billion in 2011. The company invested CHF 213 million in research and development in 2011. More than 1,200 specialists create the products and services of tomorrow. The company occupies the number one or number two slots in its respective global markets in most sectors.

For further information: Burkhard Böndel, Head of Group Communications & IR. Tel: +41 58 360 9602. Fax: +41 58 360 9802.

published May , 2013
back to Features   |   back to TechnoFront
Advantage Nonwovens
The per capita nonwoven fabric consumption in India, which was 155 gm sometime ago, is expected to touch to 350 gm by 2015 and 600 gm by 2020, whereas the per capita consumption of nonwovens in developed markets such as US and Western Europe is around 3 - 3.5 kg. The global market for nonwovens is around...
Eco textile processing & its role in sustainable development
Years of human ignorance has diminished our natural resources and aged our planet. Now, people are making an effort to change the way they are treating the planet. Being more environmentally conscious about the impact materials used for fashion...
Techno-economics of woven silk union fabrics
From the field survey and interactions held with the exporters, it is observed that new product development is the prime area that should be concentrated for future expansion of the silk industry (Naik 2010). Consumer markets are changing fast, with rapid growth in...
full viewpoint... more... more...
Table of Contents Most Recent Issues Write to Editor
Subscribe to ITJ | Write to the Editor | Rate Card | ITJ Ads | Tell A Friend | About Us | Contact Us  | Login | Register  | Home
Associated Portals:  | www.ipfonline.com | www.automotiveproductsfinder.com
IPFonline Limited, 2nd Floor, Shafika Building, 17/7 Kodambakkam High Road, Nungambakkam, Chennai - 600 034.
Tel: +91 44 42991234 (30 Lines). Fax: +91 44 42108441. Email: admin@ipfonline.com